Fume hood CompactLine DCL 1200 CR

Standard equipment for fume hoods:

- structure entirely made of galvanized steel without the use of wood-based materials
- worktop at a height of 900mm made of monolithic ceramics with a raised rim with a suspended ceramic sink 280x80mm
- toughened glass window, lifted manually with counterweight, opened upwards with a lock at the height of 500 mm (max 810mm), and additionally sliding glass (right / left). The window has a system preventing the uncontrolled drop of the window
- 2 electric sockets 230V 50Hz
- 2 water spouts with valves on the BROEN front panel
- energy-saving linear LED lighting separated from the fume hood with a glass pane
- double system the back wall with exhaust slots in the upper and lower part ensuring proper extraction of vapors lighter or heavier than air without turbulence and dead zones
- safety flap in the ceiling ensuring decompression in the event of uncontrolled pressure increase in the working chamber
- full monitoring set Schneider brand) air flow velocity in the fume cupboard window compliant with the PE-EN 14175 standard
- CE Declaration of Conformity: PN-EN 14175; PN-EN 14056; PN-EN 13150

Other optional equipment:

- main switch
- anti-shock switch
- safety switch
- 400VAC IP44 socket
- additional 230VAC IP44 sockets
- 230VAC sockets inside the working chamber IP44
- Manual Protect system - battery backup of the monitoring set
- power supply control of the socket with the option of timer setting
- additional gas taps
- metal cabinet key lock under the tabletop
- explosion-proof equipment EX
- side glazing
- truss made of acid-resistant steel, on the back wall of the manipulation chamber
- inspection openings
- flexible strip brush

Technical data

overall dims [mm]
width A1280
height B2325-2600
depth C960
working space dims (mm)
width D1150
window width D1965
height E1220
depth F635
recommended airflow [m3/h]600 - 950
required capacity of the ventilation system [m/s]0,3 - 0,5
nominal power [W]46
power supply230 VAC 50Hz
diameter of the air outlet stub [mm]Ø 200
water supplyG 1/2 '' male thread
sewage connection diameter [mm]Ø 50
electrical insulationclass I
standard ventilation systemdouble rear wall
illumination installed outside the working chamberLED, class A ++, through insulating glass / from operator panel
monitoring set standard:
- FM 550-A-0-E controller with a speed sensor AFS 100 in the fume hood window and the FA-0025-3 operator panel
- ICM 500-F-EU controller with flow control
- ICM 500-FP-EU controller with flow control and cooperation with BMS
- other Schneider controllers available on request
raising the window standard:
- manual with counterweight (lock at a height of 500mm, maximum opening 810mm)
- SC 500 - Auto Protect system - with foot switch
- SC 500 - Auto Protect system - with panel switch
frame and housing materialThe frame is made entirely of galvanized steel.
External housing made of galvanized and painted
with epoxy paint steel
working chamber wall finishingBuchtal large-size ceramic
worktopMonolithic ceramics with marine edge
worktop OPTION (available materials)- Phenolic resin, epoxy
- Stainless steel AISI 304, 316
underbench cabinet OPTION (different types)- metal, ventilated cabinet painted with epoxy paint
- cabinet for acids and alkalis made of foamed PVC
- explosion-proof cabinets Asecos 30 and 90 minutes
warranty24 months


Compact Line DCL-1200 CR

ikonka pdf Data Logger RT2014 EN